Emphasis in Engineering, Associate in Arts
The Emphasis in Engineering is designed to develop a broad base of knowledge and skills that will serve as a foundation for further study and/or pursuit of a career. Students complete a series of courses in the disciplines of Civil Technology, Electrical Technology. Electron Microscopy, Engineering, and/or Mechanical Technology.
Minimum Units Required: 60
Complete one of the following general education patterns:
- San Joaquin Delta College Associate degree General Education Pattern
- California State University General Education pattern
- Intersegmental General Education Transfer Curriculum - CSU Version
Complete a minimum of 18 units from one segment; or complete 18 units by selecting 9-15 units from one segment and an additional 3-9 units from any of the related segments listed below.
1. Civil Technology Segment
E TECH 011
|
Engineering Drafting
|
3
|
E TECH 012
|
Computer-Aided Drafting
|
3
|
E TECH 013
|
Engineering Drafting Skills
|
3
|
E TECH 020
|
Materials and Measurements
|
3
|
E TECH 022
|
Three Dimensional Modeling
|
3
|
E TECH 026
|
Technical Statics
|
3
|
E TECH 031
|
Fundamentals of Civil Drafting
|
3
|
E TECH 034
|
Machine Drafting
|
3
|
E TECH 035
|
Machine Design
|
3
|
E TECH 041
|
Civil Drafting" Site Design and Improvement
|
4
|
E TECH 046
|
Mechanical and Electrical Systems
|
3
|
E TECH 076
|
Applied Statics
|
3
|
E TECH 080
|
Applied Surveying
|
3
|
ENGR 050H
|
Special Studies: Engineering
|
1-2
|
ENGR 069V
|
Internship: Engineering Technology
|
1-8
|
2. Electrical Technology Segment
E TECH 011
|
Engineering Drafting
|
3
|
E TECH 012
|
Computer-Aided Drafting
|
3
|
E TECH 013
|
Engineering Drafting Skills
|
3
|
E TECH 020
|
Materials and Measurements
|
3
|
E TECH 022
|
Three Dimensional Modeling
|
3
|
E TECH 026
|
Technical Statics
|
3
|
E TECH 031
|
Fundamentals of Civil Drafting
|
3
|
E TECH 034
|
Machine Drafting
|
3
|
E TECH 035
|
Machine Design
|
3
|
E TECH 046
|
Mechanical and Electrical Systems
|
3
|
E TECH 047
|
Introduction to Industrial Control Systems
|
3
|
E TECH 076
|
Applied Statics
|
3
|
E TECH 080
|
Applied Surveying
|
3
|
ELECT 011
|
AC and DC Network Analysis
|
4.5
|
ENGR 050H
|
Special Studies: Engineering
|
1-2
|
ENGR 069V
|
Internship: Engineering Technology
|
1-8
|
3. Electron Microscopy Segment
E M 022
|
Ultramicrotomy for Electron Microscopy
|
4.5
|
E M 028
|
Biological Ultrastructure
|
2
|
E M 030
|
Current Microscopies: Optics, Theory, and Application
|
3
|
E M 034
|
Introduction to Materials Electron Microscopy
|
4
|
E M 035
|
Physical Electron Microscopy Laboratory
|
3.5
|
E M 037
|
Advanced Techniques in Biological Electron Microscopy
|
3.5
|
E M 038
|
Scanning Electron Microscopy
|
3
|
E M 039
|
Advanced Biological Scanning Electron Microscopy
|
2
|
E M 041
|
Analytical Scanning Electron Microscopy
|
3
|
E M 053
|
Electron Microscopy Equipment Maintenance
|
3
|
E M 058
|
Digital Imaging for Electron Microscopy
|
2
|
E M 059
|
Advanced Projects in Electron Microscopy
|
2
|
4. Engineering Segment
ENGR 001
|
Introduction to ENgineering Technology
|
3
|
ENGR 002
|
Engineering Graphics
|
3
|
ENGR 004
|
Engineering Materials
|
3
|
ENGR 006
|
Engineering Circuit Analysis
|
4
|
ENGR 008
|
Statics
|
3
|
ENGR 010
|
Surveying
|
3
|
ENGR 015
|
Selecting Topics in Engineering
|
0.5-2
|
ENGR 027
|
Engineering Fortran
|
3
|
ENGR 029
|
Engineering Applications for Digital Computations
|
3
|
ENGR 050H
|
Special Studies: Engineering
|
1-2
|
ENGR 069V
|
Internship: Engineering Technology
|
1-8
|
5. Mechanical Technology Segment
E TECH 011
|
Engineering Drafting
|
3
|
E TECH 012
|
Computer-Aided Drafting
|
3
|
E TECH 013
|
Engineering Drafting Skills
|
3
|
E TECH 020
|
Materials and Measurements
|
3
|
E TECH 022
|
Three Dimensional Modeling
|
3
|
E TECH 026
|
Technical Statics
|
3
|
E TECH 031
|
Fundamentals of Civil Drafting
|
3
|
E TECH 034
|
Machine Drafting
|
3
|
E TECH 035
|
Machine Design
|
3
|
E TECH 045
|
Practical Machine Design
|
3
|
E TECH 046
|
Mechanical and Electrical Systems
|
3
|
E TECH 047
|
Introduction to Industrial Control Systems
|
3
|
E TECH 076
|
Applied Statics
|
3
|
E TECH 080
|
Applied Surveying
|
3
|
ENGR 050H
|
Special Studies: Engineering
|
1-2
|
ENGR 069V
|
Internship: Engineering Technology
|
1-8
|
Complete elective coursework to achieve the minimum 60-unit requirement.
Minimum Units 60
|