San Joaquin Delta College




Cert_A
TOCPREVNEXT

For Help: help@deltacollege.edu

Cert_A


Administration of Justice

A J 21 Criminal Justice in Society Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a review of the history and philosophy of administration of justice in America. The student identifies the various subsystems, role expectations, and their interrelationships; theories of crime, punishment, and rehabilitation; and ethics, education, and training for professionalism in the system. (UC, CSU, CAN AJ 2)

A J 22 Concepts of Criminal Law Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a review of the historical development and philosophy of law and constitutional provisions, definitions, classification of crime, and their application to the system of administration of justice, legal research, study of case law, methodology, and concepts of law as a social force. (UC, CSU, CAN AJ 4)

A J 23 Principles and Procedures of The Justice
System Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the in-depth study of the role and responsibilities of each segment within the administration of justice system: law enforcement, judicial, and corrections. A past, present, and future exposure to each subsystem's procedures from initial entry to final disposition, and the relationship each segment maintains with its system members is covered. (CSU)

A J 24 Legal Aspects of Evidence Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the origin, development, philosophy, and constitutional basis of evidence; constitutional procedural considerations affecting arrest, search, and seizure; kinds and degrees of evidence and rules governing admissibility, judicial decisions interpreting individual rights, and case studies. (CSU, CAN AJ 6)

A J 25 Criminal Investigation Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the fundamentals of investigation which include crime scene search; the recording, collection and preservation of physical evidence; scientific aids; modus operandi; and sources of information; interviews and interrogation; follow up and case preparation. (CSU, CAN AJ 8)

A J 26 Patrol Procedures Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to teach responsibilities, techniques, and methods of police patrol. Identification of police hazards, beat patrol and observation techniques of responding to crime and emergencies, crime prevention and community policy concepts are introduced. (CSU)

A J 28 Juvenile Law and Procedures Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the organization, function, and jurisdiction of juvenile justice agencies; the processing and detention of juveniles; juvenile case study and disposition; juvenile statutes, and court procedures. (CSU)

A J 30A Critical Issues in The Justice System Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is one of two courses focusing on critical issues in the criminal justice system. It is designed to bring professional practitioners and qualified experts into the classroom to interact with students. The intent of the course is to provide an arena for the student to develop critical thinking skills and problem solving skills toward critical issues in the justice system. Topics include community policing, the county courts, decriminalization of drugs, plea bargaining, and gangs. (CSU)

A J 31 Report Preparation Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the practical aspects of gathering, organizing, and preparing written reports for law enforcement and correctional activities on local, state, and federal levels. The course includes the techniques of communicating facts, information, and ideas effectively in a simple, clear, and logical manner for various types of criminal justice system reports, letters, memoranda, directives, and administrative reports. The student gains practical experience in note-taking, report writing, and presenting testimony in court. (CSU)

A J 40 Community Relations Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to treat current aspects and problems of police community relations. Among the topics covered are police image, role conflict, communication techniques, managing abnormal behavior in the field, crisis areas, and political fringe groups. (UC, CSU)

A J 41 Narcotics Investigation and Control Units 3
Prerequisites: Reading level II or concurrent enrollment in reading.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide the student with an introduction to the identification of narcotics and dangerous drugs, contraband, investigation problems, laws, the impact of drug use on the community, and methods relating to the suppression and prosecution of narcotics and dangerous drug violations. (CSU)

A J 50H Special Studies: Administration
of Justice Units 1-2
Prerequisites: Completion of AJ 21 and one additional core course with grade of "B" or better and presentation of a project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is open to any student who wishes to do advanced work in the field of administration of justice. The course may include research, directed reading, field work, class work, or advanced study, and the course may be repeated for a maximum of four units. (CSU)

A J 51 Introduction to Correctional Science Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide the student with an overview of the history and trends of adult and juvenile corrections, including probation and parole. It focuses on the legal issues, specific laws, and general operation of correctional institutions. The relationship between corrections and other components of the judicial system is examined. (CSU)

A J 53 Correctional Interviewing and
Interventions Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an overview of the techniques in interviewing and interventions available to practitioners in corrections. The student demonstrates the use of appropriate techniques and theories in confidence-building which may be used by the correctional employee in client interviews. This is a basic course for the student who is planning to enter or who is already employed within the correctional science field. (CSU)

A J 54 Introduction to Probation and Parole Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide an introduction to the structure and functions of probation as a judicial process and parole as an executive function. Comparisons of the correctional process concerned with the evaluation, treatment, and control of offenders are made. (CSU)

A J 55 Control and Supervision in
Corrections Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: A J 51.

This course is an overview of supervision and control of inmates in local, state, and federal correctional institutions. The issues of supervision and control in a continuum from institutional daily living through crisis situations are introduced and discussed. The course emphasizes the role played by the offender and the correctional worker. Topics include inmate subculture, violence, effects of crowding on inmates and staff, and coping techniques for correctional officers in a hostile prison environment. The causes and effects of abusive tactics are discussed. (CSU)

A J 57 Legal Aspects of Corrections Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: A J 51.

This course is designed to provide the student with an awareness of the historical framework, concepts, and precedents that guide correctional practice. The course addresses the individual's perspective of the corrections environment, the civil rights of prisoners, and the responsibilities and the liabilities of corrections officials. (CSU)

A J 69V Internship: Administration
of Justice Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the administration of justice internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in administration of justice. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

A J 71 Basic Academy: Institutions Units 14
Prerequisites: None.
Limitations on Enrollment: Must meet State minimum requirements for peace officers; passage of Academy testing and examination process which includes entry-level written examination, submission of medical examination, fingerprints, and a felony disclaimer; no felony convictions or legal mandates that restrict or prohibit employment as a youth counselor or a correctional officer.
Advisories: None.

This course is designed to provide the student with the background and training needed to perform the ward supervisory duties required of youth counselors in the California Youth Authority (CYA) or correctional officers in the California Department of Corrections (CDC). The Commission on Correctional Peace Officers' Standards and Training (CPOST) certifies this course. Upon successful completion, the student receives a San Joaquin Delta College Basic Academy Certificate of Completion.

A J 73 Basic Academy: Corrections Units 14
Prerequisites: None.
Limitations on Enrollment: Must meet State minimum requirements for peace officers; passage of Academy testing and examination process which includes entry-level written examination, submission of medical examination, fingerprints, and a felony disclaimer; no felony convictions or legal mandates that restrict or prohibit employment as a correctional officer.
Advisories: None.

This course is designed to provide the student with the background and training needed to perform the duties required of correctional officers in the California Department of Corrections (CDC). The Commission on Correctional Peace Officers' Standards and Training (CPOST) certifies this course. Upon successful completion, the student receives a San Joaquin Delta College Basic Academy Certificate of Completion.

A J 89A Arrest and Control: Penal Code 832 Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide the student with an introductory overview of the law enforcement profession in the State of California. Completion of the course requires the student to demonstrate the principles of arrest and control using control techniques and handcuffs. This course satisfies the Commission on Peace Officer Standards and Training (POST) academic training requirements for California Penal Code Section 832.

A J 89B Firearms: Penal Code 832 Units 2
Prerequisites: None.
Limitations on Enrollment: Completion of a felony disclaimer and submission of fingerprints.
Advisories: None.

This course is designed to provide the student with an overview of the safe handling, care, and use of a handgun. Completion of the course requires the student to demonstrate the principles of good marksmanship using a handgun. This course satisifies the Commission on Peace Officer Standards and Traiing (POST) performance training requirements for California Penal Code Section 832.

A J 90 Selected Topics: Administration
of Justice Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of administration of justice not already covered by the existing curriculum. Units in this course do not count toward an associate degree.

A J 91 Private Security Academy Units 5
Prerequisites: None.
Limitations on Enrollment: Must submit to a criminal records check, no felony convictions (Calif. Penal Code 12021), or legal mandates that restrict or prohibit employment as a law enforcement officer.
Advisories: None.

This course is designed to provide the student with the skills necessary to ensure satisfactory completion of the requirements of the California Department of Consumer Affairs for Security Officers. This course also prepares the student for future participation in any California Police Basic Academy.

A J 92V Work Experience: Correctional
Science Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the administration of justice work experience. The student must enroll in a minimum of 7 units during the semester including work experience units. For summer session, the student must enroll in one related course in addition to work experience. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of work experience program objectives and an employer work experience agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student employed in administration of justice. The course objectives are developed by the students in consultation with his or her supervisor. The student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college work experience instructor. To register, complete an application form available at the Applied Science and Technology Division office, Holt 140.

A J 93 Basic Peace Officer Academy Units 18
Prerequisites: Reading level II or concurrent enrollment in reading; A J 94 with a grade of "C" or better.
Limitations on Enrollment: No felony convictions or legal mandates that restrict or prohibit employment as a law enforcement officer; must meet State minimum requirements for peace officers; passage of academy testing and examination process which includes entry-level written examination, submission of medical examination, fingerprints, and a felony disclaimer.

This course is designed for basic entry-level training for the student preparing for a position as Level I Reserve Officers, Police Officers, and Deputy Sheriffs assigned to patrol. The course is certified by the State of California Commission on Peace Officer Standards and Training (POST). Upon successful completion, the student receives a San Joaquin Delta College Certificate of Completion and is certified by the State of California Department of Justice.

A J 94 Peace Officer Academy Orientation Units 3
Prerequisites: None.
Limitations on Enrollment: Successful passage of Academy testing and examination process.
Advisories: None.

This course is designed to familiarize the student with the Peace Officer Standards and Training (P.O.S.T.) Peace Officer Academy training program and provide a better understanding of the requirements and commitments that must be considered.

Agriculture Business

AGBUS 10 Agricultural Accounting Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide the student with the principles of agricultural accounting systems and records. Accounting principles relating to cash, receivables, inventories, depreciation, payroll, payables, and income tax are included. The course examines the use of enterprise budgets, cash flow budgets, and financial statements to enhance agribusiness management decision making. (CSU)

AGBUS 12 Agricultural Economics Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to examine the basic economic principles of resource allocation, production, cost analysis, and market price equilibrium with primary application to the agricultural sector. The course includes pricing and marketing of agricultural commodities, survey of agricultural credit, and policy issues. (UC, CSU)

AGBUS 13 Agriculture and Natural Resource
Mathematics Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to fundamental arithmetic and algebraic operations including fractions, decimals, equations, percentages, ratios, proportions, and linear, area, and volume measurements. Computations involving plant populations, farm machine outputs, construction costs, feed ingredients, and farm finance are stressed. (CSU)

AGBUS 15 Agribusiness Computer
Applications Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a basic introduction to ag business computer applications in the workplace. Students use personal computers, software applications, including word processing, spreadsheets, databases, internet, and other software appropriate to agribusiness. (CSU, CAN AG 2)

AGBUS 46 Agricultural Marketing Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide a survey of marketing aspects of the agricultural industry. The course includes an overview of the structure and institutional aspects of the marketing system. Industry studies of the marketing of selected locally grown commodities are included. (CSU)

AGBUS 50H Special Studies: Agriculture
Business Units 1-2
Prerequisites: Completion of survey course with a grade of "B" or better and presentation of a project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is open to the student qualified to do advanced work in the field. The course may include research, directed reading, field work, or other advanced study and the course may be repeated for a maximum total of four units. (CSU)

AGBUS 69V Internship: Agricultural
Business Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the agricultural business internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in agricultural business. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

AGBUS 75 Selected Topics: Agriculture Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of agriculture not already covered by the existing curriculum. Units earned in this course do not count towards the associate degree.

AGBUS 96V Work Experience: Agricultural
Business Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the agricultural business work experience. The student must enroll in a minimum of 7 units during the semester including work experience units. For summer session, the student must enroll in one related course in addition to work experience. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of work experience program objectives and an employer work experience agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student employed in agricultural business. The course objectives are developed by the students in consultation with their supervisor. Students are engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college work experience instructor. To register, complete an application form available at the Applied Science and Technology Division office, Holt 140.

Agriculture Engineering

AGEGR 20A Agricultural and Natural
Resources Shop Skills Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to basic agricultural and natural resources skills required in shop practices including proper selection and care of tools and equipment. Skills are developed in the area of wood working, metal working, welding, electrical, and plumbing, including the selection, use, care, and safety of tools and equipment. (CSU)

AGEGR 21 Agricultural Welding Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the techniques used in the construction and repair of agricultural equipment. The student uses arc welders and oxy-actylene torches for fusion welding, heating, brazing, cutting, and hardsurfacing metals. Metal Inert Gas (MIG) and Tungsten Inert Gas (TIG) welding are emphasized. (CSU)

AGEGR 30A Introduction to Industrial and
Commercial Engines Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the basic theory, maintenance, construction, and repair of two-stroke and four-stroke commercial, industrial, recreational, marine, motorcycle, and lawn and garden engines. (CSU)

AGEGR 30B Industrial and Commercial
Engines Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to analyze, trouble-shoot, repair, and overhaul both two-cycle and four-cycle engines and their industrial applications. (CSU)

AGEGR 30C Industrial Equipment: Electrical
and Electronic Systems Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to instruct the student to analyze and repair electrical problems found on industrial and commercial engines and equipment. (CSU)

AGEGR 30D Industrial Equipment:
Power Trains Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce specialized applications, drive trains, clutches, transmissions, and final drives. The student learns how to write work orders, develops parts lists, and works with customers. (CSU)

AGEGR 33 Equipment Maintenance and
Operation Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the safe operation and use of wheel tractors, crawlers, skid loaders, front end loaders, backhoes, and forklifts. Preventive maintenance, adjustments, minor repairs, and servicing of equipment are emphasized. (CSU, CAN AG 4)

AGEGR 50H Special Studies: Agriculture
Engineering Units 1-2
Prerequisites: Completion of survey course with grade of "B" or better and presentation of a project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is open to the student qualified for advanced work in the field. The course may include research, directed reading, field work, or other advanced study and the course may be repeated for a maximum of four units. (CSU)

AGEGR 64 Basic Engines Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the fundamentals of two-stroke and four-stroke engines in relationship to oils, lubrication, safety inspections, precision measurements, and related mathematics. (CSU)

AGEGR 65 Engine Theory Basics Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to instruct the student in the proper safety and operational theory of internal combustion engines. Emphasis is placed on operational theory and preventive maintenance of the engines found on most compact equipment. Information provided in the course enables the student to better understand service work performed on equipment. (CSU)

AGEGR 66 Compact Diesel Engines Units 2.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an explanation of the design, operation, and proper maintenance of the latest compact diesel engines approved by the California Air Resources Board (CARB) for operation and sales in California after 1997. Topics include fuel characteristics, current emissions testing and standards, related engine systems, operation, and trouble-shooting. Problem-solving component failures and disassembly/assembly of a representative engine is included. Upon successful completion of this course the student is prepared to take the Outdoor Power Equipment Certification (OPEC) test. (CSU)

AGEGR 69V Internship: Agricultural
Engineering Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the agricultural engineering internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in agricultural engineering. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

AGEGR 75 Selected Topics: Agricultural
Engineering Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of agricultural engineering not already covered by the existing curriculum. Units in this course do not count towards the associate degree.

AGEGR 87A Compact Engines Specialization Units 3
Prerequisites: AGEGR 30D.
Limitations on Enrollment: This course requires instructor approval to enroll.
Advisories: None.

This course is designed for the advanced student in compact engines. The student completes an advanced specialized project developed in consultation with the instructor.

AGEGR 96V Work Experience: Agriculture
Engineering Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the agricultural engineering work experience. The student must enroll in a minimum of 7 units during the semester including work experience units. For summer session, the students must enroll in one related course in addition to work experience. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of work experience program objectives and an employer work experience agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student employed in agricultural engineering. The course objectives are developed by the students in consultation with their his or her supervisor. The student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college work experience instructor. To register, complete an application form available at the Applied Science and Technology Division office, Holt 140.

Animal Husbandry Sciences

AH SC 10 Principles of Animal Science Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide an overview of the principles of animal science and the interrelationships of domestic animals and mankind. The course investigates various disciplines including anatomy and physiology, reproduction, nutrition, animal health, animal products, animal behavior, and genetics. (UC, CSU, CAN AG 6)

AH SC 10L Principles of Animal Science
Laboratory Units 1
Prerequisites: AH SC 10, or concurrent enrollment in AH SC 10.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide an introduction to the empirical methods including data collection and analysis as well as an investigation of the basic management concepts associated with animal science. (CSU)

AH SC 11A Introduction to Livestock
Evaluation Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the basic factors involved in evaluation and selection of breeding, feeder and market animals, and the application of these factors in the livestock industry. The visual appraisal of live animals and carcasses combined with production records are used to determine the practical usefulness and productivity of livestock. (UC, CSU)

AH SC 11B Beginning Livestock Evaluation Units 2
Prerequisites: AH SC 11A with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the basic factors involved in evaluation and selection of breeding, feeder and market animals, and the application of these factors in the livestock industry. The visual appraisal of live animals and carcasses combined with production records are used to determine the practical usefulness and productivity of livestock. (UC, CSU)

AH SC 11C Intermediate Livestock
Evaluation Units 2
Prerequisites: AH SC 11B with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the basic factors involved in evaluation and selection of breeding, feeder and market animals and the application of these factors in the livestock industry. The visual appraisal of live animals and carcasses, combined with production records, will be used to determine the practical usefulness and productivity of livestock. (UC, CSU)

AH SC 11D Advanced Livestock Evaluation Units 2
Prerequisites: AH SC 11C with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the basic factors involved in evaluation and selection of breeding, feeder and market animals, and the application of these factors in the livestock industry. The visual appraisal of live animals and carcasses combined with production records are used to determine the practical usefulness and productivity of livestock. (UC, CSU)

AH SC 19 Feeds and Feeding Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce animal nutrition and its application to livestock feeding programs. The course includes composition and nutritional value of animal feeds, digestion, assimilation, and utilization of feeds. The nutritional requirements of farm animals and economical feeding programs are presented. (CSU, CCAg 240)

AH SC 21 Livestock Production Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course introduces students to the beef, sheep, and swine industry in California and in the United States. The breed, market classes, grades, and selection of marketing and breeding animals are stressed. The feeding, care, management, and marketing of the different segments of the industry are discussed. (CSU)

AH SC 25A Introduction to Livestock
Presentation Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to apply animal husbandry practices and procedures that are involved with domestic farm animals. The use of equipment and facilities, handling of animals, and preparation of a budget and calendar of operations are discussed. The planning and purchase of feeder animals are covered. (CSU)

AH SC 25B Beginning Livestock Presentation Units 2
Prerequisites: AH SC 25A with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to apply animal husbandry practices and procedures that are involved with domestic farm animals. The use of equipment and facilities, handling of animals, and preparation of a budget and calendar of operation are discussed. The planning and purchase of feeder animals are covered. (CSU)

AH SC 25C Intermediate Livestock
Presentation Units 2
Prerequisites: AH SC 25B with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare students to apply animal husbandry practices and procedures that are involved with domestic farm animals. The use of equipment and facilities, handling of animals, and preparation of a budget and calendar of operation are discussed. The planning and purchase of feeder animals are covered. (CSU)

AH SC 25D Advanced Livestock Presentation Units 2
Prerequisites: AH SC 25C with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to apply animal husbandry practices and procedures that are involved with domestic farm animals. The use of equipment and facilities, handling of animals, and preparation of a budget and calendar of operation are discussed. The planning and purchase of feeder animals are covered. (CSU)

AH SC 28 Basic Horse Husbandry Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide an introduction to the horse industry in the United States. The student studies types, breeds, selection, care, and management of the light horse. (CSU, CAN AG 26)

AH SC 34 Animal Health and Sanitation Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an overview of elementary anatomy and physiology of livestock including preventive measures for common diseases and parasites. The safe use of various vaccines, equipment, and restraint techniques used in the routine treatment of farm animals and the selection of proper treatment techniques, veterinary terminology, and handling practices are included. (CSU, CCAg 245)

AH SC 36 Livestock Breeding Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to introduce the student to the anatomy and physiology of farm animal reproduction and the basic principles of genetics and their application to livestock production. Gestation, parturition, lactation, artificial insemination, embryo transfer, inheritance, breeding systems, production testing, and selection for breeding are included. (CSU)

AH SC 50H Special Studies: Animal
Husbandry Sciences Units 1-2
Prerequisites: Completion of survey course with grade of "B" or better and presentation of a project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is open to the student qualified to do advanced work in the field. The course may include research, directed reading, field work, or other advanced study, and the course may be repeated for a maximum total of 4 units. (CSU)

AH SC 69V Internship: Animal Science Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the animal science internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in animal science. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

AH SC 75 Selected Topics: Animal
Husbandry Science Units 1-2
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one of the specialized areas of animal husbandry not already covered by existing curriculum. Units in this course do not count toward an associate degree.

AH SC 96V Work Experience: Animal
Husbandry Science Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the agricultural engineering work experience. The student must enroll in a minimum of 7 units during the semester including work experience units. For summer session, the student must enroll in one related course in addition to work experience. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of work experience program objectives and an employer work experience agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student employed in the area of animal science. The course objectives are developed by the students in consultation with his or her supervisor. The student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college work experience instructor. To register, complete an application form available at the Applied Science and Technology Division office, Holt 140.

Anthropology

ANTHR 1 Cultural Anthropology Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the anthropological study of culture. The course emphasizes cultural similarities and differences worldwide with respect to kinship, marriage, economics, politics, religion, and social inequality. (UC, CSU, CAN ANTH 4)

ANTHR 2 Physical Anthropology Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to physical evolution of humans from the earliest hominid forms to modern groups. Drawing from biological, geological, and anthropological data, the course will outline and explain the various forces acting upon human evolutionary development. Problems of race and racial classification will also be explored. (UC, CSU, CAN ANTH 2)

ANTHR 2L Physical Anthropology Laboratory Units 1
Prerequisites: Completion of or concurrent enrollment in ANTHR 2.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a laboratory course which supplements ANTHR 2. The student will become familiar with the process used in identifying and analyzing human skeletal remains, the physical evidence used in the study of primate evolution including fossilization, geologic time scale and archaeological reconstruction of prehistoric activities, comparative osteology of non-human primates, primate behavior, paleoanthropology, and the development of stone tool technologies. (UC, CSU)

ANTHR 4 Introduction to Linguistics Units 3
Prerequisites: Reading level II or concurrent enrollment in reading.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the study of language in theory and practice. The student explores what is known about human language - its uniqueness, its structure, its use, its diversity, and its universality. An effort is made to analyze the relationship between language, culture, and social levels. (UC, CSU)

ANTHR 6 Introduction to North American
Indians Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a comparative study of native American Indians and cultures from the Arctic to the southern border of the United States, using archaeological and ethnographic materials. (UC, CSU)

ANTHR 10 Introduction to Archaeology Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a survey of the development of archaeology as an anthropological study, with particular emphasis on the contributions of archaeology toward supplementing man's understanding of the development of human culture. The objectives, methods, and techniques of modern archaeology are combined with a survey of major archaeological sites and cultures. (UC, CSU, CAN ANTH 6)

ANTHR 12A Beginning Field Archaeology Units 1
Prerequisites: Completion of, or concurrent enrollment in, ANTHR 10.
Limitations on Enrollment: None.
Advisories: None.

This course is a beginning applied archaeology course which offers the student opportunities to do field and or laboratory research. The field work includes site survey and excavation. The laboratory work emphasizes treatment, classification, and initial analysis of artifacts and data recovered through excavations. (UC, CSU)

ANTHR 12B Intermediate Field Archaeology Units 1
Prerequisites: Completion of, or concurrent enrollment in ANTHR 10.
Limitations on Enrollment: None.
Advisories: None.

This course is an intermediate applied archaeology course which offers a student opportunities to do field and/or laboratory research. The field work includes site survey and excavation. The laboratory work emphasizes treatment, classification, and analysis of artifacts and data recovered through field excavations. (UC, CSU)

ANTHR 15 Selected Topics: Anthropology Units 0.5-1
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one of the specialized areas of Anthropology not already covered by the existing curricula. (CSU)

ANTHR 50H Special Studies: Anthropology Units 1-2
Prerequisites: Presentation of a project acceptable to the instructor and the division chairperson; ANTHR 1, 2, or 10 with a grade of "B" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to allow the qualified student to do advanced work in the field. The course includes research, directed reading, field work, or other advanced study. The course may be repeated for a maximum total of 4 units. (CSU)

ANTHR 75 Selected Topics: Anthropology Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of anthropology not covered by the existing curriculum. Units in this course do not count toward an associate degree.

Arabic

ARAB 51 Elementary Arabic Units 2.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the Arabic language and Arabic culture. Emphasis is placed on the following skills in the order given: listening, speaking, reading, and writing. The combined five units of ARAB 51 and 52 are equivalent to ARAB 1. (UC, CSU)

ARAB 52 Elementary Arabic Units 2.5
Prerequisites: Successful completion of ARAB 51 with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the Arabic language and Arabic culture. Emphasis is placed on the following skills in the order given: listening, speaking, reading, and writing. The combined five units of ARAB 51 and 52 are equivalent to ARAB 1. (UC, CSU)

ARAB 53 Elementary Arabic Units 2.5
Prerequisites: Successful completion of ARAB 1 or 52 with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the Arabic language and Arabic culture. Emphasis is placed on the following skills: listening, speaking, reading, and writing. The combined five units of ARAB 53 and 54 are equivalent to ARAB 2. (UC, CSU)

ARAB 54 Elementary Arabic Units 2.5
Prerequisites: Successful completion of ARAB 53 with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the Arabic language and Arabic culture. Emphasis is placed on the following skills in the order given: listening, speaking, reading, and writing. The combined five units of ARAB 53 and 54 are equivalent to ARAB 2. (UC, CSU)

ARAB 75 Selected Topics: Arabic Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of Arabic not covered by the existing curriculum. Units in this course do not count toward an associate degree.

Architectural Drafting

ARCH 1 Basic Architectural Drafting Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to drafting for the student majoring in architecture, interior design, or construction. Course topics include techniques and skills of drafting and design, introduction to building codes and construction methods, and basic construction documents used to communicate the building process. (CSU)

ARCH 2 Architectural Practice:
Working Drawings Units 3
Prerequisites: ARCH 1 and ARCH 12; or ARCH 1 and E TECH 12; all with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is the study of building methods, processes, and the production of architectural working drawings as a communication medium. Design elements, building codes, structural components, and assembly procedures are emphasized. (CSU)

ARCH 3 Architectural Presentations Units 3
Prerequisites: ARCH 1 or equivalent; with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to various methods and approaches to architectural presentation, including model building, perspective development, and rendering. The course is oriented to the artistic presentation of architectural structures and includes work with color, black and white, and ink, utilizing various printing techniques commonly found in architectural offices. (UC, CSU)

ARCH 5 Architectural Detailing Units 3
Prerequisites: ARCH 1 with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to drafting of construction details as they apply to various architectural structures. Building codes and regulations pertinent to the various details are emphasized. (CSU)

ARCH 8 Materials of Construction Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to instruct the student in the uses and applications of processes and materials related to general construction. (CSU)

ARCH 9 Design Fundamentals Units 3
Prerequisites: ARCH 1 or concurrent enrollment in ARCH 1.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the basic principles and theories of architectural design through discussion and simple or semi-abstract exercises. The student studies and explores these topics as a means of establishing a design vocabulary. Studies also encompass development of sketching, presentation, and communication skills. (CSU)

ARCH 12 Computer-Aided Drafting Units 3
Prerequisites: E TECH 13 or ARCH 1, with a grade of "C" or better, or concurrent enrollment in E TECH 13 or ARCH 1.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to utilize Computer Aided Drafting (CAD) software on microcomputer CAD systems to produce a variety of drawings. The student learns the function and operation of typical CAD system components. Some of the course work allows the student to work in the field of individualized interest. (CSU)

ARCH 15 Selected Topics in Architecture Units 0.5-2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one of the specialized areas of architecture not already covered by the existing curriculum. (CSU)

ARCH 20 Fundamentals of Architectural
Graphics Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: ARCH 1 or concurrent enrollment in ARCH 1.

This course is an introduction to basic architectural graphic skills. Topics include orthographic, axonometric, and oblique projections as well as basic one and two point perspectives. Elementary model building is also included. (CSU)

ARCH 21 Architectural Presentations Units 3
Prerequisites: ARCH 20 with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to build on the students skills acquired in fundamental architectural graphics. Topics include advanced level media techniques, two and three dimensional presentations, shades and shadows, color studies, and presentation organization. (CSU)

ARCH 22 Design Fundamentals Units 3
Prerequisites: ARCH 1 or concurrent enrollment in ARCH 1; or ARCH 20 or concurrent enrollment in ARCH 20.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the basic principles and theories of architectural design. The student studies and explores simple or semi-abstract topics as a means of establishing a design vocabulary. The development of sketching, presentation, and communication skills is also included. (CSU)

ARCH 69V Internship: Architecture Units 1-8
Prerequisites: None.
Prerequisite Skills: Ability to assess personal interests, values, and skills. Ability to research careers, and to make decisions relative to career planning and goal setting. Ability to conduct a job search, write a resume, and interview for employment.
Limitations on Enrollment: The student must enroll in a course that is directly related to the architecture internship. The student must enroll in a minimum of 7 units, including internship units during the semester. For summer session, the student must enroll in one related course in additoin to internship. The combined total numbers a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 20, 31, 32, 33.

This course is designed for the student participating in an occupational internship in architecture. Application of discipline-related skills and knowledge of the Secretaries' Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. To register, complete an application form available at the Applied Science and Technology Division office, Holt 140. (CSU)

ARCH 73 Blueprint Reading Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student for occupations requiring the ability to read and understand working drawings related to architectural structures. Residential and commercial blueprints and specifications are emphasized.

ARCH 76 Selected Topics: Architectural
Drafting Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of architectural drafting not already covered by the existing curriculum. Units in this course do not count toward an associate degree.

ARCH 76A Opportunities in Architectural
Drafting Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This topic course is designed to introduce the student to career opportunities in Architectural Drafting. Edcuational requirements, educational resources, and career-specific information are discussed. Units earned in this course do not count toward the associate degree.

ARCH 87A Architectural Drafting
Specialization Units 2
Prerequisites: ARCH 2.
Limitations on Enrollment: This course requires instructor approval to enroll.
Advisories: None.

This course is designed for the advanced student in architectural drafting. The student complete an advanced specialized project developed in consultation with the instructor.

Art

ART 1A Art History Units 3
Prerequisites: Reading level II or concurrent enrollment in reading.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide a survey of the visual arts of Europe from prehistoric times to the Renaissance. (UC, CSU, CAN ART 2, CAN ART SEQ A with both ART 1A and ART 1B)

ART 1B Art History Units 3
Prerequisites: Reading level II or concurrent enrollment in reading.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide a survey of the visual arts of Europe from the beginning of the Renaissance to the present. (UC, CSU, CAN ART 4, CAN ART SEQ A with both ART 1A and ART 1B)

ART 2 Art History of the Non-Western
World Units 3
Prerequisites: Reading level II or concurrent enrollment in reading.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a survey of the arts of primitive societies and the arts of Oceania, Africa, Pre-Columbian America, India, China, and Japan. (UC, CSU)

ART 3 Introduction to Art Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the basic concepts for the appreciation of the visual arts for the non-art major. (UC, CSU)

ART 4 Exploring Art Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an appreciation course for non-art majors. It provides fundamental concepts, background, and experiences in visual expression. Line, color, texture, form, and volume are examined by a variety of two and three dimensional means. (UC, CSU)

ART 5 Selected Topics: Art Units 1-2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one of the specialized areas of art not already covered by existing curricula. (CSU)

ART 5A Mural Painting Units 2
Prerequisites: None..
Limitations on Enrollment: None.
Advisories: None.

This topic course is a study of mural painting for effective communication. The course concentrates on the analysis and understanding of traditional mural painting styles and their modern variations. Techniques of mural painting are practiced with attention to a wide range of usage. (UC, CSU)

ART 6 Color and Design Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is a beginning experience dealing with the principles and elements of design as the basis for all art activity. Through a variety of two and three dimensional media the student analyzes traditional and modern forms of art. (UC, CSU, CAN ART 14)

ART 7A Beginning Painting Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course concentrates on the analysis and understanding of traditional painting styles and their modern variations. Techniques of painting are practiced with attention to a wide range of usage. (UC, CSU, CAN ART 10)

ART 7B Intermediate Painting Units 3
Prerequisites: ART 7A or equivalent.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course emphasizes refinement and application of painting techniques for the solution of more complex design problems. (UC, CSU)

ART 7C Advanced Painting Units 3
Prerequisites: ART 7B or equivalent.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course emphasizes the development of individual style and its application to solving specialized assignment related to professional goals. (UC, CSU)

ART 8 Mural Painting Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of mural painting for effective communication. The course concentrates on the analysis and understanding of traditional mural painting styles and their modern variations. Techniques of mural painting are practiced with attention to a wide range of usage. (CSU)

ART 16 Descriptive Drawing and Rendering Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to various perspective systems and rendering fundamentals. The course is applicable to graphic, interior, architectural and landscape designs. (UC, CSU).

ART 20A Introductory Sculpture Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective three dimensional communications. The course concentrates on the analysis and understanding of traditional sculpture styles and their modern variations. Techniques of sculpting materials are practiced with attention to a wide range of usage. (UC, CSU, CAN ART 12)

ART 20B Beginning Sculpture Units 3
Prerequisites: ART 20A.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes refinement and application of sculpture techniques for the solution of more complex design problems. (UC, CSU)

ART 20C Intermediate Sculpture Units 3
Prerequisites: ART 20B.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. (UC, CSU)

ART 20D Advanced Sculpture Units 3
Prerequisites: ART 20C.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes refinement and application of sculpture techniques for the solution of more complex design problems. (UC, CSU)

ART 33A Beginning Drawing Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of drawing for effective communications at a beginning level. The course concentrates on the analysis and understanding of traditional drawing styles and their modern variations. Techniques of drawing are practiced with attention to a wide range of usage. (UC, CSU, CAN ART 8)

ART 33B Intermediate Drawing Units 3
Prerequisites: ART 33A with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of drawing for effective communications at an intermediate level. The course concentrates on the analysis and understanding of traditional drawing styles and their modern variations. Techniques of drawing are practiced with attention to a wide range of usage. (UC, CSU)

ART 33C Figure Drawing Units 3
Prerequisites: ART 33B with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of the human figure. The course concentrates on the analysis and understanding of traditional figure drawing styles and their modern variations. Techniques of awareness of form structure and the human figure are practiced with attention to expressive possibilities. (UC, CSU, CAN ART 24)

ART 36A Beginning Painting Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course concentrates on the analysis and understanding of traditional painting styles and modern variations. Techniques of painting are practiced with attention to a wide range of usage. (UC, CSU)

ART 36B Beginning Painting Units 1.5
Prerequisites: ART 7A.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course emphasizes refinement and application of painting techniques for the solution of more complex design problems. ART 36A-B is the equivalent of ART 7A. (UC, CSU)

ART 36C Intermediate Painting Units 1.5
Prerequisites: ART 36B.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. ART 36C-D is the equivalent of ART 7B. (UC, CSU)

ART 36D Intermediate Painting Units 1.5
Prerequisites: ART 36C.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and rendering of painted forms for effective communications. The course emphasizes the development of individual style and its application to solving specialized assignment related to professional goals. ART 36A-D is the equivalent of ART 7B. (UC, CSU)

ART 40A Beginning Printmaking Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to and survey of standard printmaking techniques and processes. The course concentrates on the analysis and understanding of traditional and contemporary styles. Techniques are practiced with attention to a wide range of usage and individual expression. (UC, CSU, CAN ART 20)

ART 40B Intermediate Printmaking Units 3
Prerequisites: ART 40A.
Limitations on Enrollment: None.
Advisories: None.

This course is a concentrated study of standard printmaking techniques and processes. The course provides for an in-depth exploration of traditional styles and their modern variations. Techniques and individual expression are practiced with attention to a wide range of usage. (UC, CSU)

ART 40C Advanced Printmaking Units 3
Prerequisites: ART 40B.
Limitations on Enrollment: None.
Advisories: None.

This course is a concentrated study of specific printmaking techniques chosen by the individual student with instructor supervision. This course provides for an in-depth exploration leading to a specific technique understanding. (UC, CSU)

ART 43A Beginning Drawing Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of drawing methods and creative expression. The course concentrates on the analysis and understanding of traditional drawing styles and their modern variations. Techniques of drawing are practiced with attention to a wide range of usage. ART 43A-B is the equivalent of ART 33A. (UC, CSU)

ART 43B Beginning Drawing Units 1.5
Prerequisites: ART 43A.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of drawing methods and creative expression. The course concentrates on the analysis and understanding of traditional drawing styles and their modern variations. Techniques of drawing are practiced with attention to a wide range of usage. ART 43A-B is the equivalent to ART 33A. (UC, CSU)

ART 43C Intermediate Drawing Units 1.5
Prerequisites: ART 43B.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of problem solving for effective communications. The course concentrates on analysis and understanding of pertinent drawing styles and their functional variations. Techniques of drawing are practiced with attention to a wide range of usage. ART 43C-D is the equivalent of ART 33B. (UC, CSU)

ART 43D Intermediate Drawing Units 1.5
Prerequisites: ART 43C.
Limitations on Enrollment: None.
Advisories: None.

This course is a study of problem solving for effective communications. The course concentrates on the analysis and understanding of pertinent drawing styles and their functional variations. Techniques of drawing are practiced with attention to a wide range of usage. ART 43A-B is the equivalent of ART 33B. (UC, CSU)

ART 44A Introductory Ceramics Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study in the use of clay forms for effective communication. The course concentrates on the analysis and understanding of traditional ceramic styles and their modern variations. Techniques of handbuilding are practiced with attention to a wide range of usage. Throwing on the potter's wheel is introduced but the emphasis of the course is on handbuilding. Art 44A-B (Introductory Ceramics) is equivalent to ART 64A (Introductory Ceramics). (UC, CSU, CAN ART 6 with both ART 44A and 44B)

ART 44B Introductory Ceramics Units 1.5
Prerequisites: ART 44A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study in the use of clay form for effective communication. The course concentrates on the analysis and understanding of traditional ceramic styles and their modern variations. Techniques of the potter's wheel is emphasized with attention to a wide range of usage. Art 44A-B (Introductory Ceramics) is the equivalent to ART 64A (Introductory Ceramics). (UC, CSU, CAN ART 6 with both ART 44A and 44B)

ART 44C Beginning Ceramics Units 1.5
Prerequisites: ART 44B.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study in the use of clay forms for effective communication. The course concentrates on the analysis and understanding of traditional ceramic styles and their modern variations. This course emphasizes the refinement and application of wheel techniques for the solution of more complex design problems. The theory of glaze development is introduced. ART 44C-D (Beginning Ceramics) is equivalent to ART 64B (Beginning Ceramics). (UC, CSU)

ART 44D Beginning Ceramics Units 1.5
Prerequisites: ART 44C.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study in the use of clay forms for effective communication. The course emphasizes the refinement and application of wheel techniqes for the solution of more complex design problems. The practice of glaze development is introduced. ART 44C-D (Beginning Ceramics) is equivalent to ART 64B (Beginning Ceramics). (UC, CSU)

ART 45A Intermediate Ceramics Units 1.5
Prerequisites: ART 44D with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is the study and use of clay forms for effective communication. The course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. Kiln building theory is introduced. ART 45A-B (Intermediate Ceramics) is the equivalent of ART 65A (Intermediate Ceramics).. (UC, CSU)

ART 45B Intermediate Ceramics Units 1.5
Prerequisites: ART 45A with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is the study and use of clay forms for effective communication. The course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. Kiln building theory is continued. ART 45A-B (Intermediate Ceramics) is the equivalent of ART 65A (Intermediate Ceramics).. (UC, CSU)

ART 45C Advanced Ceramics Units 1.5
Prerequisites: ART 45B with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study and use of clay for effective communication. The course continues to emphasize the development of individual style and its application to solving specialized assignments related to professional goals.. Kiln firing is introduced. ART 45C-D (Advanced Ceramics) is equivalent to ART 65B (Advanced Ceramics). (UC, CSU)

ART 45D Advanced Ceramics Units 1.5
Prerequisites: ART 45C with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study and use of clay for effective communication. The course continues to emphasize the development of individual style and its application to solving specialized assignments related to professional goals. Kiln firing is continued. ART 45C-D (Advanced Ceramics) is equivalent to ART 65B (Advanced Ceramics). (UC, CSU)

ART 46A Introductory Sculpture Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective three dimensional communications. The course concentrates on the analysis and understanding of traditional sculpture styles and their modern variations. Techniques of sculpting materials are practiced with attention to a wide range of usage. ART 46A-B is the equivalent of ART 20A. (UC, CSU, CAN ART 12 with both ART 46A and 46B)

ART 46B Introductory Sculpture Units 1.5
Prerequisites: ART 46A.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material forms for effective communications. The course concentrates on the analysis and understanding of traditional sculpture style and their modern variations. ART 46A-B is the equivalent of ART 20A. (UC, CSU, CAN ART 12 with both ART 46A and 46B)

ART 46C Beginning Sculpture Units 1.5
Prerequisites: ART 46B.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material form for effective communications. The course concentrates on the analysis and understanding of traditional sculpture styles and their modern variations. ART 46C-D is equivalent of ART 20B. (UC, CSU)

ART 46D Beginning Sculpture Units 1.5
Prerequisites: ART 46C.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material forms for effective communications. The course emphasizes refinement and application of sculpture techniques for the solution of more complex design problems. ART 46C-D is equivalent to ART 20B. (UC, CSU)

ART 48A Intermediate Sculpture Units 1.5
Prerequisites: ART 46D.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes the development of individual skills and its application to solving specialized assignments related to professional goals. Techniques of sculpting materials are practiced with attention to a wide range of usage. ART 48A-B is equivalent to ART 20C. (UC, CSU)

ART 48B Intermediate Sculpture Units 1.5
Prerequisites: ART 48A.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for communications. The course emphasizes the development of individual style and its application to solving specialized assignments. ART 48A-B is equivalent to ART 20C. (UC, CSU)

ART 48C Advanced Sculpture Units 1.5
Prerequisites: ART 48B.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes refinement and application of sculpture techniques for the solution of more complex design problems. ART 48C-D is equivalent to ART 20D. (UC, CSU)

ART 48D Advanced Sculpture Units 1.5
Prerequisites: ART 48C.
Limitations on Enrollment: None.
Advisories: None.

This course is a study and use of material and form for effective communications. The course emphasizes the development of individual style and refinement and application of sculpture techniques for the solution of more complex design problems. ART 48C-D is equivalent to ART 20D. (UC, CSU)

ART 50H Special Studies: Art Units 1-2
Prerequisites: Completion of survey course with grade of "B" or better and presentation of project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is open the student qualified to do advanced work in the field. The course may include research, directed reading, field work, or other advanced study and the course may be repeated for a maximum total of four units. (CSU)

ART 64A Introductory Ceramics Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study and use of clay forms for effective communication. The course concentrates on the analysis and understanding of traditional ceramic styles and their modern variations. Techniques of ceramic building and throwing are practiced with attention to a wide range of usage. (UC, CSU, CAN ART 6)

ART 64B Beginning Ceramics Units 3
Prerequisites: ART 64A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study in the use of clay forms for effective communication. The course emphasizes the refinement and application of wheel techniques for the solution of more complex design problems. The theory of kiln firing and the practice of glaze development is introduced. (UC, CSU)

ART 65A Intermediate Ceramics Units 3
Prerequisites: ART 64B.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study and use of clay for effective communication. The course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. Kiln building theory is introduced. (UC, CSU)

ART 65B Advanced Ceramics Units 3
Prerequisites: ART 65A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a study and use of clay for effective communication. This course emphasizes the development of individual style and its application to solving specialized assignments related to professional goals. Kiln firing and management are introduced.. (UC, CSU)

ART 80 Selected Topics: Art Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one of the specialized areas of art not already covered by existing curriculum. Units in this course do not count toward an associate degree.

Astronomy

ASTRO 1 Introductory Astronomy Units 3
Prerequisites: Math Level II; MATH 80 or 83B each with a grade of "C" or better.
Limitations on Enrollment: None.
Advisories: None.

This course is designed as a non-mathematical, descriptive course in general astronomy dealing with the nature and evolution of the solar system, stars, galaxies, and the universe. The planets, moon, meteors, comets, and other members of our solar system are included. The college planetarium is used for constellation, planet and galaxy identification as well as demonstrating space and time coordinates. (UC, CSU)

ASTRO 1 L Astronomy Laboratory Units 1
Prerequisites: Math level II; completion of or concurrent enrollment in ASTRO 1, 2, or 4.
Limitations on Enrollment: None.
Advisories: None.

This course is laboratory work performing quantitative experiments of physical phenomena relating to astronomy. The experiments include working in the planetarium with the telescope. (UC, CSU)

ASTRO 50H Special Studies: Astronomy Units 1-2
Prerequisites: Completion of survey course with grade of "B" or better and presentation of a project acceptable to the instructor and division chairperson.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to give the student an opportunity to research a problem in astronomy using the college's planetarium, telescopes, laboratory, or library. The project must be acceptable to a member of the astronomy staff and approved by the division chairperson. This course may be repeated for a maximum total of four units. (UC, CSU)

Athletics

ATH 50 Soccer Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (UC, CSU)

ATH 51 Water Polo Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (UC, CSU)

ATH 52 Football Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Northern California Football Conference. (CSU)

ATH 53 Cross Country Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 54 Baseball Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 55 Golf Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 56 Basketball Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 57 Track Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 58 Wrestling Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 59 Tennis Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 60 Swimming and Diving Team: Men Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code Requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 61 Soccer Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 62 Volleyball Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community Colege Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 63 Swimming and Diving Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code Requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 64 Basketball Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 65 Softball Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 66 Tennis Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 67 Water Polo Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 68 Track Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the California Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 69 Cross Country Team: Women Units 2
Prerequisites: None.
Limitations on Enrollment: Must meet the Californi Community College Athletic Eligibility Code requirements and after tryouts, be selected for the team.
Advisories: None.

This course is part of the intercollegiate athletic program of Delta College. Delta College participates in the Bay Valley Conference. (CSU)

ATH 75 Selected Topics: Athletics Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of athletics not already covered by the existing curriculum. Units in this course do not count toward an associate degree.

Automotive Technology

AUTO 50 Automatic Transmissions and
Transaxles Units 6
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: AUTO 62.

This course is designed to prepare the student to analyze, adjust, service, and repair automatic transmissions and transaxles on foreign and domestic automobiles. (CSU)

AUTO 51 Manual Drivetrain and Axles Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: AUTO 62.

This course is designed to prepare the student to analyze, service, and repair: differentials, standard transmissions and transaxles, front-wheel drive axles, drivelines, four-wheel drive systems, and clutch systems. (CSU)

AUTO 52 Engine Rebuilding Units 6
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: AUTO 64.

This course is designed to prepare the student to analyze, adjust, service, and repair gasoline-powered automobile engines. The course includes precision machining operations and the complete rebuilding of an engine. (CSU)

AUTO 53 Brakes, Suspension, and Steering Units 7
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: AUTO 62.

This course is designed to prepare the student to analyze, adjust, service, and repair automotive brakes, suspension, and steering systems. (CSU)

AUTO 54 Starting, Charging, and Electrical
Systems Units 6
Prerequisites: AUTO 63 or DIESL 49 either with a grade of "C" or better and concurrent enrollment in AUTO 63.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to effectively diagnose and repair automotive starting, charging, and electrical systems. (CSU)

AUTO 55 Ignition Systems and Electronic
Engine Controls Units 6
Prerequisites: AUTO 63 with a grade of "C" or better. Corequisite: Concurrent enrollment in AUTO 63.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to diagnose and repair automotive engine performance problems and driveability malfunction-related failures. The student completing the requirements of AUTO 55, Ignition Systems and Electronic Engine Controls, and AUTO 56, Fuel Management and Computer Controls, is eligible to test to receive certification for the approved Clean Air Car course from the State of California Bureau of Automotive Repair. (CSU)

AUTO 56 Fuel Management and Computer
Controls Units 6
Prerequisites: AUTO 63 with a grade of "C" or better and concurrent enrollment in AUTO 63.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to troubleshoot and diagnose automotive fuel-injection systems, engine computer systems, emission systems, and some carburetion systems. The student completing the requirements of AUTO 55, Ignition Systems and Electronic Engine Controls, and AUTO 56, Fuel Management and Computer Controls, is eligible to test to receive certification for the approved Clean Air Car course from the State of California Bureau of Automotive Repair. (CSU)

AUTO 57 Air Conditioning, Heating, and
Electrical Systems Units 6
Prerequisites: AUTO 63 with a grade of "C" or better.
Corequisites: Concurrent enrollment in AUTO 63.
Limitations on Enrollment: None.
Advisories: None.

The course is designed to prepare the student to diagnose and repair air conditioning, heating and specialized electrical accessories systems. (CSU)

AUTO 62 Brakes, Suspensions, and
Powertrain Systems Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to analyze, adjust, and repair basic automotive brake, suspension, steering, and drivetrain systems. (CSU)

AUTO 63 Fuel and Electrical Systems Units 3
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to analyze, adjust, and repair basic automotive electrical, ignition, and fuel management systems. (CSU)

AUTO 64 Basic Engines Units 3
Prerequisites: Reading level II.
Limitations on Enrollment: None.
Advisories: None.

This course is an introduction to the fundamentals of two-stroke engines, oils, lubrication, safety inspections, and related mathematics and measurement. (CSU)

AUTO 69V Internship: Auto Mechanics Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the auto mechanics internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in auto mechanics. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

AUTO 69W Internship: Auto Body
Technology Units 1-8
Prerequisites: None.
Limitations on Enrollment: The student must enroll in a course that is directly related to the auto body technology internship. The student must enroll in a minimum of 7 units during the semester including internship units. For summer session, the student must enroll in one related course in addition to internship. The combined total number of units a student may take in internship, work experience, and occupational practice may not exceed a maximum of 16 units. Participation requires submission and approval of internship program objectives and an employer internship agreement.
Advisories: GUID 30, 31, 32, 33.

This course is designed for the student participating in an occupational internship in auto body technology. Application of discipline-related skills and knowledge of Secretaries Commission on Achieving Necessary Skills (SCANS) competencies is emphasized. Each student is engaged in a specific research project or on-the-job learning activities under the supervision of a worksite supervisor and a college internship instructor. (CSU)

AUTO 70A Clean Air Car Course Units 2.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: For those students who choose to receive the Basic Clean Air Car Course certification the student must meet the California Department of Consumer Affairs/Bureau of Automotive Repair requirements prior to entry into the course: Automotive tune-up or engine performance related work experience 1 year; or, 9 semester units; or, 180 hours of trade school instruction.

This course is designed to meet the California State requirements for the Department of Consumer Affairs/ Bureau of Automotive Repair (DCA/BAR), Basic Clean Air Car Course. This course is required for the advanced level student or Journeyman level technician who wishes to become a Smog Check Test and Repair Technician. The student who enrolls in this course must meet the DCA/BAR prerequisite guidelines before entering the course in order to receive Clean Air Car Course certification. The course includes, State rules and regulations for Smog Check; required equipment for testing and repairing vehicles incorporated in the Smog Check program; manuals and software required for Smog Check Stations; common repair procedures used on emission related failed vehicles; and the safe use and practices of Emission Inspection System equipment.

AUTO 70B Advanced Clean Air Car Course Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: For those students who choose to receive the Advanced Clean Air Car Course certificaion, the student must meet the California Department of Consumer Affairs/Bureau of Automotive Repair requirements prior to entry into the course; Certification of the Basic Clean Air Course; or, an Intern license; or a curent basic area Smog Check License.

This course is designed to meet the California State requirements for the Department of Consumer Affairs/Bureau of Automotive Repair (DCA/BAR) Advanced Clean Air Car course. This course is required for the advanced level student or Journeyman level technician who wishes to become a Smog Check Test and Repair Technician. The student who enrolls in this course must meet the DCA/BAR prerequisite guidelines before entering the course in order to receive an Advanced Clean Air Car Course certification. This course includes State rules and regulations for Enhanced Area Smog Check; required equipment for testing and repairing vehicles incorporated in the Enhanced Area Smog Check program; baseline testing and common repair procedures used on enhanced area emission related vehicle failures; the safe use and practices of Emission Inspection system equipment, with special attention to safe vehicle/dynamometer testing practices.

AUTO 70C Advanced Engine Performance/
Emission Systems Alternative Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: For those students who choose to receive certification, this course is designed for the advanced level student, or the journey level tune-up technician.

The textbook publisher will provide the final examination that concludes the course; certification is provided by the testing agency. This course is designed to meet the California State requirements for the Department of Consumer Affairs/Bureau of Automotive Repair (DCA/BAR), Advanced Engine Performance/Emission System Alternative Course. This course is an alternative to the National Institute for Automotive Service Excellence (ASE) requirement for the Advanced Emissoin Specialist Technician (EA) License. This course is designed to allow the advanced student or journeyman level technician to review advanced level computer management, fuel, ignition and emission diagnosis, testing, and repair techniques. The student uses diagnostic instruments and advanced level repair techniques to perform vehicle repairs successfully.

AUTO 70F On Board Diagnostics II
Update Training Course Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: For those students who choose to receive the certification the Advanced Emission Specialist (EA) licensed Technician; advanced level student, or Journeyman level technician must meet the California Department of Consumer Affairs/Bureau of Automotive Repair requirements prior to entry into the course, and successfully attend all classes and attain a satisfactory score on the final examination.

This course is designed to meet the California State requirements for the Department of Consumer Affairs/Bureau of Automotive Repair (DCA/BAR), On Board Diagnostics II Update Training Course. This course is required for the Advanced Emission Specialist (EA) licensed Technician, Advanced level student, or Journeyman level technician, who needs to certify for license application or renewal. The student who enrolls in this course must meet the DCA/BAR prerequisite guidelines before entering the course in order to receive an Update certification. The course is designed to update the advanced level technician to test and repair vehicles that are equipped with the On Board Diagnostic II compliant engine management system. The technician receives certification upon successful completion of the course.

AUTO 75 Selected Topics: Automotive
Technology Units 0.5-3
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to offer instruction in one or more of the specialized areas of automotive technology not already covered by existing curriculum. Units in this course do not count toward an associate degree.

AUTO 76 Foundation Brakes Units 1.5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: This course is designed for the advanced level student or journeyman level technician; the student who enrolls in this course should have successfully completed beginning level brake courses.

This course is designed to enhance the skills of the advanced level student or journeyman level technician by training and retraining the technician in the latest repair and process techniques in the area of foundation brakes. The latest theories, equipment changes, and industry trends are discussed and applied in the laboratory. The student learns the proper process for turning today's drums and rotors on and off car, bleeding today's vehicle braking systems, understanding and repairing the latest drum and disc brake systems, and diagnosing today's braking systems.

AUTO 80A Body and Fender Units 2
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize the basic auto body safety standards. Course topics include elementary sheetmetal repair, auto body welding, metal finishing, plastic fillers, grinding, and shrinking.

AUTO 80B Body and Fender Units 2
Prerequisites: AUTO 80A
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize MIG welding of light gauge material, basic auto body hand tools, advanced metal finishing, grinding, filling, removal of body parts, and basic painting procedures.

AUTO 80C Body and Fender Units 2
Prerequisites: AUTO 80A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize frame and alignment equipment and procedures, grinding techniques, shrinking gouges and aluminum, replacement of trim and upholstery, and painting procedures.

AUTO 80D Body and Fender Units 2
Prerequisites: AUTO 80A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize MIG welding of galvanized and aluminum materials, flux core welding, plasma arc cutting, replacement of structural components, restoration of corrosion protection, and glass service.

AUTO 80E Body and Fender Units 2
Prerequisites: AUTO 80A
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize the utilization of frame straightening equipment, body alignment procedures, removal and installation of headliners, fiberglass body preparation and repair, and plastic parts repair.

AUTO 80F Body and Fender Units 2
Prerequisites: AUTO 80A
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize frame measurement and body alignment systems, body panel removal and replacements, specialized plastic repairs, and painting.

AUTO 80G Body and Fender Units 2
Prerequisites: AUTO 80A
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize arc welding, spot welding, MIG welding, metal straightening, fiberglass body repair, unibody structural panel repair, frame repair, and suspension and steering systems.

AUTO 80H Body and Fender Units 2
Prerequisites: AUTO 80A
Limitations on Enrollment: None.
Advisories: None.

This course is designed to emphasize paint spraying, rubbing and polishing techniques, custom painting tools, materials and equipment, introduction to electromechanical components, overview of apprenticeship programs, and awareness of auto body business practices.

AUTO 81A Introductory Auto-Body Repair
Laboratory Units 1
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide additional laboratory experiences for the student enrolled in AUTO 84A. Areas of emphasis include sheet metal welding, metal straightening and finishing, and filling of materials.

AUTO 81B Beginning Auto-Body Repair
Laboratory Units 1
Prerequisites: AUTO 84A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide additional laboratory experiences for the student enrolled in AUTO 84B. Areas of emphasis include auto body collision repair, refinement of metal working skills, and removing, repairing, and replacing trim and upholstery.

AUTO 81C Intermediate Auto-Body Repair
Laboratory Units 1
Prerequisites: AUTO 84B.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide additional laboratory experiences for the student enrolled in AUTO 84C. Areas of emphasis include basic unibody repair, fiberglass body repair, plastic parts repair, roof panel repair and replacement, and complete vehicle painting.

AUTO 81D Advanced Auto-Body Repair
Laboratory Units 1
Prerequisites: AUTO 84C.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to provide additional laboratory experiences for the student enrolled in AUTO 84C. Areas of emphasis include advanced unibody repair and repair of suspension and steering systems. The student is assigned shop work which is evaluated against industry standards.

AUTO 84A Introductory Auto-Body Repair Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is a theory and laboratory course offering in-depth training in sheetmetal welding, metal straightening and finishing, and filling of metals. Painting of a car is introduced.

AUTO 84B Beginning Auto-Body Repair Units 5
Prerequisites: AUTO 84A.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to allow the student to work on more complicated types of auto body damage to further refine basic metal working skills. The removing, repairing, and aligning of trim and upholstery panels are covered.

AUTO 84C Intermediate Auto-Body Repair Units 5
Prerequisites: AUTO 84B.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to give the student instruction in basic unibody repair, fiberglass body repair, plastic parts repair, and roof panel replacement and repair. The student learns and performs the steps necessary to complete a full-car paint job.

AUTO 84D Advanced Auto-Body Repair Units 5
Prerequisites: AUTO 84C.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to advance the student to more complicated portions of unibody repair. The repair of suspension and steering systems are covered. The student perform assigned jobs which must be performed within time constraints imposed by employers.

AUTO 87A Automobile Mechanics
Specialization Units 3-4
Prerequisites: AUTO 52 or AUTO 53.
Limitations on Enrollment: This course requires instructor approval to enroll.
Advisories: None.

This course is designed for the advanced student in automotive mechanics. The student completes an advanced specialized project developed in consultation with the instructor.

AUTO 87B Auto Electrics Specialization Units 3-4
Prerequisites: AUTO 55 or AUTO 56.
Limitations on Enrollment: This course requires instructor approval to enroll.
Advisories: None.

This course is designed for the advanced student in automotive electrics. The student completes an advanced specialized project developed in consultation with the instructor.

AUTO 87C Auto Body Specialization Units 3-4
Prerequisites: AUTO 84D.
Limitations on Enrollment: This course requires instructor approval to enroll.
Advisories: None.

This course is designed for the advanced student in auto body. The student completes an advanced specialized project developed in consultation with the instructor.

AUTO 90A Introduction to Closed Loop
Fuel Control Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide introductory training in closed loop fuel control. The course includes the study of operations of electronic modules, sensors, and actuators. The course includes use of scan tools and diagnostic procedures using digital multimeters.

AUTO 90B Throttle Body Injection Systems Units 0.5
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide in-depth training in throttle body injection system diagnosis and repair. The course includes diagnosis of driveability concerns, repair of throttle body injectors, idle air control systems, throttle position sensors, pressure regulators, fuel lines, and pump systems. Fuel pressure testers, scan tools, and digital multimeters are used. Diagnostic strategies and repair procedures are included.

AUTO 90C Port Fuel Injection Systems Units 0.5
Prerequisites: None.
Limitations on Enrollment: AD Delco-Approved Technician.
Advisories: None.

This course is designed to provide in-depth training in multi-port fuel injection system diagnosis and repair. The course includes diagnosis of driveability concerns and repair of multi-port fuel injectors, fuel rail, idle air control systems, throttle position sensors, pressure regulators, fuel lines, and pump systems. Fuel pressure testers, scan tools, and digital multimeters are used. Diagnostic strategies and repair procedures are included.

AUTO 90D Enhanced Emission Test
Failure Diagnosis Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide in-depth training in the Inspection/ Maintenance (I/M) 240 testing, local requirements, and investigation-based diagnosis of I/M 240 failures. The student studies the operation and diagnostic performance testing of oxygen sensors, catalytic converters, and evaporative system integrity testing. Scan tools, digital multimeters, laboratory scopes, and five-gas analyzers are used while learning to apply diagnostic strategies and advanced repair procedures.

AUTO 90E On Board Diagnostics Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide in-depth training of the On Board Diagnostics (OBD), meeting the second level of Federal requirements (OBD II). The use of scan tools and laboratory scopes to diagnose OBD II is included. Diagnostic procedures include diagnostics with and without trouble codes. The student studies the use of investigation-based technical service bulletin (TSB) searches. Catalyst monitoring misfire detection, heated oxygen sensors, freeze frame/failure records, enhanced evaporative systems operation and related topics.

AUTO 90F Driveability and Emission
Diagnosis Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of fuel control and its effects on tailpipe emissions. Fuel management systems, emission systems, catalytic convertors, air injection, exhaust gas recirculation, evaporative emission control, and positive crankcase ventilation valves are included. Emissions and driveability symptoms are analyzed and strategies for repair are applied.

AUTO 90I Air Conditioning Systems and
Service Units 1.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of air conditioning systems theory of operation, configuration, diagnosis, service, and repair. Topics include performance and leak testing of systems, checking for contamination and proper refrigerant disposal, recovery and charging, lubrication, and basic manual mode and blower control.

AUTO 90J Air Conditioning Controls Units 1
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an in-depth study of air distribution and heating, ventilation, and air conditioning controls. Topics include compressor clutch control, engine cooling system, air distribution, manual and automatic climate control systems, rear heater and air conditioning controls, operator interface, and strategy based diagnostics. Systems are analyzed and strategies applied for effective repair procedures.

AUTO 90L Automotive Electrical Circuits and
Digital Meters Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide pertinent information and a basic understanding of electricity and meters. Topics include basic electricity, fundamentals of electrical circuits, and operation of the Fluke 87 digital volt ohmmeter. Application of Ohm's Law to basic series and parallel circuits, digital meter functions to read circuit resistance, amperage flow, resistance in common automotive circuits, and parasitic draw are calculated and measured.

AUTO 90M Automotive Electronics Units 1
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide a study of automotive electricity and electronics. The course begins with review of the basics of electricity and continues with the concept of power. Topics also include capacitance and time delay devices, electromagnetism and current induction in various automotive coils and motor applications. Circuits are assembled and analyzed using a digital volt ohmmeter.

AUTO 90N Automotive Electronics Units 1
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide further study of automotive electrical and electronic systems. The course begins with a review of the basics of electricity and study continues with the concept of electrical power. Typical automotive electronic circuits are assembled using various semi conductive devices, and analyzed using digital volt ohmmeters. Generators (alternators) are studied to determine the use and characteristics of semi conductors and electronic circuitry.

AUTO 90P Electronic Ignition Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of the basic electronic ignition system from the initial design to the computerized direct ignition systems utilized today. Systems and components include High Energy Ignition system, ignition control, primary circuit, secondary circuit, position sensors, knock sensors, and circuit operation. Diagnostic procedures for common failures are identified.

AUTO 90Q Starting and Charging Systems Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide a basic understanding of charging and starting systems. The course focuses on basic electricity, batteries, operation and diagnosis of generators, and cranking systems. Diagnostic tests such as parasitic draw, phantom drain, load testing, charging output, and system diagnostic testing are included.

AUTO 90R Heavy Duty Electrical Diagnosis Units 1
Prerequisites: None.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of basic theory and diagnostic testing of heavy-duty electrical systems. Topics covered are batteries, starting systems, and generator systems. Basic electrical skills, meter reading, battery testing, starting system testing, charging system testing, and circuit wiring diagnosis are applied.

AUTO 90T Foundation Brakes Units 1
Prerequisites: None; exempt from assessment.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to enhance the skills of the AC-Delco technician by training and retraining the technician in the latest repair and process techniques in the area of foundation brakes. The latest theories, equipment changes, and industry trends are discussed and applied in the laboratory. The student learns the proper process for turning today's drums and rotors on and off car, bleeding today's vehicle braking systems, understanding and repairing the latest drum and disc brake systems, and diagnosing today's braking systems.

AUTO 90U Four-Wheel Antilock Brakes Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of four-wheel antilock brake theory of operation, configuration, diagnosis, service, and repair. Topics include antilock brake system basics, components, operation, and diagnosis of basic systems. Electronic diagnostic procedures and the required equipment are included.

AUTO 90V Rear Wheel Antilock Brakes Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of rear wheel antilock brake theory of operation, configuration, diagnosis, service, and repair. Topics include rear wheel antilock brake system basics, components, operation, diagnosis of basic systems. Diagnostic procedures and the required equipment are included.

AUTO 90W Teves Mark II Antilock Brake
System Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of Teves Mark II antilock brake system theory of operation, configuration, diagnosis, service, and repair. Topics include antilock brake system basics, components, operation, and diagnosis of basic systems. Diagnostic procedures and the required equipment to diagnose the Teves Mark II system are included.

AUTO 90X Teves Mark IV Antilock
Brake System Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of Teves Mark IV antilock brake system theory, configuration, diagnosis, service, and repair. Topics include antilock brake system basics, components, operation, and diagnosis of basic systems. Diagnostic procedures and the required equipment to diagnose the Teves Mark IV system are included.

AUTO 90Y Bosch 2U and Bosch 5 Antilock
Brake System Units 0.5
Prerequisites: None; exempt from assessmet testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of Bosch 2U and Bosch 5 antilock brake systems theories of operation, configuration, diagnosis, service, and repair. Topics include antilock brake system basics, components, operation, and diagnosis of basic systems. Diagnostic procedures and the required equipment to diagnose the Bosch 2U and Bosch 5 systems are included.

AUTO 90Z Delphi Chassis Antilock
Brake System Units 0.5
Prerequisites: None; exempt from assessment testing.
Limitations on Enrollment: AC Delco-Approved Technician.
Advisories: None.

This course is designed to provide an understanding of Delphi Chassis VI antilock brake theory of operation, configuration, diagnosis, service, and repair. Topics include antilock brake system basics, components, operation, and diagnosis of basic systems. Diagnostic procedures and the required equipment to diagnose the Delphi Chassis system are included.

Automotive Technology Apprenticeship

A-AUT 50 Automatic Transmissions and
Transaxles Units 5
Prerequisites: None.
Limitations on Enrollment: Indentured Apprentice.
Advisories: None.

This course is designed to prepare the student to analyze, adjust, service, and repair automatic transmissions and transaxles on foreign and domestic automobiles. (CSU)

A-AUT 51 Manual Drivetrain and Axles Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to analyze, service, and repair: differentials, standard transmissions and transaxles, front-wheel drive axles, drivelines, four-wheel drive systems, and clutch systems. (CSU)

A-AUT 52 Engine Rebuilding Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to analyze, adjust, service, and repair gasoline-powered automobile engines. The course includes precision machining operations and the complete rebuilding of an engine. (CSU)

A-AUT 53 Brakes, Suspension, and Steering Units 5
Prerequisites: None.
Limitations on Enrollment:
Advisories: None.

This course is designed to prepare the student to analyze, adjust, service, and repair: automotive brakes, suspension, and steering systems. (CSU)

A-AUT 54 Starting, Charging, and
Electrical Systems Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

This course is designed to prepare the student to effectively diagnose and repair automotive starting, charging, and electrical systems. (CSU)

A-AUT 55 Ignition Systems and Electronic
Engine Controls Units 5
Prerequisites: None.
Limitations on Enrollment: Indentured Apprentice.
Advisories: None.

This course is designed to prepare the student to diagnose and repair automotive engine performance problems and driveability malfunction-related failures. (CSU)

A-AUT 56 Fuel Management and Computer
Controls Units 5
Prerequisites: None.
Limitations on Enrollment: Indentured Apprentice.
Advisories: None.

This course is designed to prepare the student to troubleshoot and diagnose automotive fuel-injection systems, engine computer systems, emission systems, and some carburetion systems. (CSU)

A-AUT 57 Air Conditioning, Heating,
and Electrical Systems Units 5
Prerequisites: None.
Limitations on Enrollment: None.
Advisories: None.

The course is designed to prepare the student to diagnose and repair automotive air conditioning, heating, and specialized electrical accessories systems. (CSU)

A-AUT 78A Auto Body Fundamentals Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize basic auto body safety standards. The course includes elementary sheetmetal repair, auto body welding, metal finishing, applying plastic fillers, grinding, and shrinking.

A-AUT 78B Basic Auto Body Repair
and Painting Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured Apprentice.
Advisories: None.

This course is designed to emphasize Metal Inert Gas (MIG) welding of light gauge metal, basic auto body tools, basic metal finishing, grinding, filling, removing auto body parts, and basic painting procedures.

A-AUT 79A Auto Body Frame Alignment Units 2
Prerequisites: None.
Limitation on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize frame and alignment equipment and procedures, grinding techniques, shrinking aluminum, replacing trim and upholstery, and painting procedures.

A-AUT 79B Auto Body Metal Working Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize Metal Inert Gas (MIG) welding of galvanized and aluminum materials, flux core welding, plasma arc cutting, replacing structural components, restoring corrosion protection, and replacing glass.

A-AUT 80A Frame Straightening
Fundamentals Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize the utilization of frame straightening equipment, body alignment procedures, removal and installation of headliners, fiberglass body preparation and repair, and plastic parts repair.

A-AUT 80B Advanced Frame Straightening Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize frame measurement and body alignment, body panel removal and replacement, specialized plastic repairs, and painting.

A-AUT 81A Advanced Auto Body Repair Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured apprentice.
Advisories: None.

This course is designed to emphasize arc welding, Metal Inert Gas (MIG) welding, metal straightening, and repairing of: fiberglass body, unibody structural panel, frame, and suspension and steering system.

A-AUT 81B Auto Body Painting Units 2
Prerequisites: None.
Limitations on Enrollment: Indentured Apprentice.
Advisories: None.

This course is designed to emphasize paint spraying; rubbing and polishing techniques; custom painting tools, materials, and equipment; electromechanical components; apprenticeship programs; and auto body business practices.


logo
San Joaquin Delta College
http://www.deltacollege.edu
TOCPREVNEXT